اینو دیدی

مرجع دانلود فایل ,تحقیق , پروژه , پایان نامه , فایل فلش گوشی

اینو دیدی

مرجع دانلود فایل ,تحقیق , پروژه , پایان نامه , فایل فلش گوشی

مقاله در مورد گلکار

اختصاصی از اینو دیدی مقاله در مورد گلکار دانلود با لینک مستقیم و پر سرعت .

لینک دانلود و خرید پایین توضیحات

فرمت فایل word  و قابل ویرایش و پرینت

تعداد صفحات: 50

 

In other views, organizational knowledge is not merely consider as individual one. Some of knowledge exist in group for [10]. Then the knowledge which is measured or measure something should cover 2 classification of knowledge i,e implicit and explicit and group, individual and organizational one.

The second dimension of this tetragonal basis of figure 1 is types of knowledge in an organization, individual and group from implicitly and explicitly.

 

 

 

 

 

Figure 2: equipoised cube for measurement method the necessities for

The cubical volume of figure 2 indicates integration of tetragonal base in measurement method with types of knowledge in organization

So we have a cube of 6 types of knowledge (from the intersection of implicit and explicit knowledge with indivisual, group, organizational knowledge) that each of then must be compared in the Tetragonal of "knowledge volume" , "knowledge volue" , "knowledge interest and expenses" and "Transformation speed of knowledge".

Now we should find a knowledge management model which is capable of integrating with this cognitive tetragonal model –Nonaka-

Jakichi Model is a suitable one to reconcile with this cognitive tetragonal model and can be considered as a basis for measurement model –Nonaka- Takochi Model as a cognitive model is based on types of knowledge. Hidden and obvious information have been discussed exactly in this model. In this model indivisual, group, organizational knowledge are converted to each other in a loop form too. [11] Then ,Nonaka. Takochi Model can be delineated as measurement Model base. But it should be mentioned here that this model has a dynamic nature.[12] in dynamic Models There are several main and important indexes that separate them from static ones.[13]

dependence to time; Dynamic models depend on time and in dingle of time they show different behavior from themselves which caused by main variable of time in them.

Cause and effect relationships: Dynamic Models are composed of varied cause and effect relationships. One cause itself can the effect of other cause. So in dynamic models the beginning strip of cause and effect relation ships is not clear but the cause and effect impacts of all indexes on each other is measurable and visible.

Feedback circles: in dynamic models feedback plays the main role. Any effect can effect on its cause. The increase of effect can boots or decrease cause directly or indirection.


دانلود با لینک مستقیم


مقاله در مورد گلکار

تحقیق درمورد سیمان 17 ص

اختصاصی از اینو دیدی تحقیق درمورد سیمان 17 ص دانلود با لینک مستقیم و پر سرعت .

لینک دانلود و خرید پایین توضیحات

فرمت فایل word  و قابل ویرایش و پرینت

تعداد صفحات: 16

 

سیمانهای نوع IP , IS,I‌ و P I(PM) II , و III با مواد هوا زا نیز که با علامت A مشخص می شود ، ساخته می شوند.

جدول (2 ـ 8 ) مقادیر متوسط ترکیبات سیمانهای پرتلند

سیمان

ترکیبات سیمان ، درصد

C3S

C2S

C3A

C4AF

CaSO4

CaO آزاد

MgO

پس ماند نامحلول

نوع I

59

15

12

8

9/2

8/0

4/2

2/1

نوع II

46

29

6

12

9/2

6/.

2

1

نوع III

60

12

12

8

9/3

3/1

6/2

9/1

نوع IV

20

46

5

12

9/2

3/0

7/2

1

نوع V

43

36

4

12

7/2

4/0

6/1

1

مقادیر حداکثر و حداقل در جدول فوق بر اساس دستورالعمل ASTM C150-84

شکل (2 ـ 4 ) روند افزایش مقاومت بتن های ساخته شده با 335 کیلوگرم از سیمانهای مختلف در متر مکعب بتن ،

سیمان پرتلند معمولی (تیپ I ) ، سیمان اصلاح شده (نوع II ) ، سیمان زود سخت شونده (نوع III ) ، سیمان با حرارت زایی کم ( نوع IV ) و سیمان ضد سولفات (نوع V )

تقسیم بندی سیمانها به تیپ های مختلف به این معنی نیست که سیمان های قرار گرفته در یک نوع خاص با یکدیگر متفاوت نیستند. بعلاوه خواص بعضی سیمانها به گونه أی است که می توان آنها را در چند نوع طبقه بندی نمود. یک نوع سیمان ممکن است خاصیت خواسته شده أی را برآورد نماید ، لیکن از نقطه نظرهای دیگر مسائلی را ایجاد کند. به این دلیل باید تعادلی بین خواص درخواستی بوجود آورده و بعلاوه ملاحظات اقتصادی را نیز منظور داشت.

سیمان نوع 2 مثالی است از سیمانی که این تعادل در آن رعایت شده است . امروزه روش ساخت سیمان پیشرفت زیادی نموده است و سعی می شود با توسعه بیشتر آن سیمانهای مختلف با خواص خواسته شده و مطابق با استاندارد تهیه شود .

سیمان پرتلند معمولی (نوع 1)

این نوع سیمان معمولترین سیمانی است که در همة موارد به غیر از مواردی که بتن در معرض سولفات موجود در خاک یا آب قرار می گیرد ، بکار می رود . استاندارد B S12 : 1978 ضریب اشباع آهک را برای این نوع سیمان بین 66/0 و 02/1 محدود می کند . این ضریب بر اساس فرمول زیر که عبارات داخل پرانتزها درصد وزنی اکسیدهای تشکیل دهنده سیمان هستند ، قابل محاسبه می باشد .

 

آهک آزاد اضافی سلامت سیمان را به مخاطره می اندازد ، لذا باید محدود گردد . اگرچه در استاندارد ASTM C150-84 محدودیت خاصی برای آهک توصیه نشده است و لیکن مقدار آهک آزاد معمولاً کمتر از 5/0 درصد می باشد .

سایر مشخصات استاندارد در زیر خلاصه می شود .

BS 12:1978

ASTM C 150-84

مقدار اکسید منیزیم

% 4 >

% 6 >

پس ماند نامحلول

% 5/1 >

%75/0 >

افت سرخ شدن

% 2 >

% 3 >

مقدار گچ ( بصورت So3 ) وقتی که درصد C3A :

% 5 >

% 5/2

-

% 5 >

% 3

-

% 8 >

-

% 3

% 8 >

-

% 5/3

طی سالها تولید سیمان نوع 1 ، تغییراتی در مشخصات آن پدید آمده است . در مقایسه با 40 سال قبل سیمانهای جدید C3S و ریزی بالاتری را دارا می باشند . استاندارد B S 12:1978 حداقل سطح مخصوص 225 m2/kg را مشخص می کند . در نتیجه مقاومت فشاری 28 روزه سیمانهای جدید بیشتر بوده ولی افزایش مقاومت دراز مدت آنها کمتر است . نتیجة عملی این تغییرات این است که باید انتظار مقاومت بیشتر با زمان را در سیمانهای جدید تا حدی تقلیل داد . این نکته مهمی است که باید در نظر داشت بخصوص که امروزه مقاومت 28 روزه معمولاً اساس سنجش قرار می گیرد .

سیمان پرتلند نوع 1 معمولترین سیمانی است که دارای مرغوبیت بالایی است و امروزه در مقیاس وسیعی در جهان مصرف قرار دارد .

سیمان پرتلند زود سخت شونده ( نوع 3 )

همانطوریکه از نام سیمان پیداست مقاومت این سیمان به سرعت افزایش می یابد . (جدول 2-8 را ببینید) این خاصیت به علت درصد بالای C3S در این سیمان ( تقریباً 70 درصد ) و ریزی بالا ( حداقل 225 m2/kg ) می باشد . البته در سالهای اخیر وجه تمایز این سیمان با سیمان نوع 1 در ریزی بالای این سیمان است و اختلاف مابین ترکیبات شیمیایی آنها ناچیز است .

استفاده اساسی از این سیمان موقعی است که قالبها باید برای بتن ریزی مجدد سریعاً بازشوند و یا زمانی که برای پیشرفت سریعتر کار ساختمان به مقاومت زودرس نیاز می باشد . این سیمان به علت ایجاد حرارت خیلی بالا نبایستی در بتن ریزی های حجیم و یا در قطعات بزرگ بتنی بکار رود . اما از طرف دیگر در بتن ریزی در هوای سرد بعلت حرارت بالا این سیمان می تواند از یخ زدگی سریع جلوگیری نماید . زمان گیرش سیمانهای نوع 1 و نوع 3 تقریباً یکسان است . قیمت تمام شده سیمان نوع 3 کمی بیش از سیمان پرتلند نوع 1 می باشد .

سیمان پرتلند زود سخت شوندة مخصوص

این سیمان که مقاومت بالایی در زمانی کوتاه ایجاد می کند ، برای کارهای خاص و بر اساس سفارش مخصوص ساخته می شود . مقاومت زودرس بالا توسط ریزی ( 700 تا 900 متر مربع بر کیلوگرم ) و گچ بالاتر تامین می گردد . استفاده خاص این سیمان در قطعات پیش تنیده و در تعمیرات فوری بتن های خراب می باشد .

در پاره ای از کشورها سیمانی با گیرش تنظیم شده از مخلوطی از سیمان پرتلند ، فلوئور و آلومینات کلسیم با یک کند گیر کننده مناسب (معمولاً اسید سیتریک ) ساخته می شود. زمان گیرش (1 تا 20 دقیقه ) توسط مواد خام تشکیل دهنده و آسیاب و پختن آنها کنترل می گردد. در حال که مقاومت زود رس اولیه با مقدار فلوئور و آلومینات کلسیم کنترل می گردد. این سیمان قابل منبسط شدن می باشد ولی ارزش آن موقعی است که مقاومت بالایی در زمانی کوتاه مورد نیاز می باشد.

شکل (2 ـ 5 ) ـ افزایش حرارت هیدراتاسیون سیمانهای پرتلند نگهداری شده در C ْ21 (نسبت آب به سیمان 4/0 می باشد).

سیمان

سیمان پرتلند با حرارت زایی کم (نوع 4 )

این سیمان که نخستین بار جهت مصرف در سدهای وزنی عظیم ساخته شد ، در واکنش با آب حرارت کمی تولید می کند. هر دو استاندارد ASTM C150 – 84 و BS1370:1979 حرارت هیدراتاسیون را به j/g 250 ( cal/g 60 ) پس از 7 روز و به j/g 290 ( cal/g 70 ) بعد از 28 روز محدود می کنند.

بر اساس استاندارد BS1370 محدودیت ضریب اشباع آهک بین 66/0 تا 08/1 بوده و به علت درصد کمتر ترکیبات C3S و C3A در این سیمان ، آهک افزایش مقاومت این سیمان کندتر ازسیمان پرتلند معمولی است لیکن مقاومت نهائی بی اثر باقی می ماند. میزان ریزی این سیمان نبایستی از m 2/kg 320 کمتر باشد تا بدینوسیله افزایش مقاومت لازم تأمین گردد.

در آمریکا سیمان پرتلند یوزولانی (نوع P ) بعنوان سیمانی با حرارت زایی کم مشخص می گردد در حالی که برای سیمان نوع IP حرارت هیدراتاسیون متعادلی در نظر گرفته می شود . این نوع


دانلود با لینک مستقیم


تحقیق درمورد سیمان 17 ص

تحقیق درموردمتن انگلیسی اپک جدید 1000

اختصاصی از اینو دیدی تحقیق درموردمتن انگلیسی اپک جدید 1000 دانلود با لینک مستقیم و پر سرعت .

لینک دانلود و خرید پایین توضیحات

فرمت فایل word  و قابل ویرایش و پرینت

تعداد صفحات: 2

 

What is OPEC?

Frequently asked questions about crude oilFrequently asked questions about OPECFrequently asked questions about the petroleum industry

The organization of the Petroleum Exporting Countries (OPEC) is a permanent inter-governmental organization, currently made up of 11 oil producing and exporting countries, spread across three continents America, Asia and Africa. The members are Algeria, Indonesia, the Islamic Republic of Iran, Iraq, Kuwait, the Socialist People’s Libyan Arab Jamahiriya, Nigeria, Qatar, Saudi Arabia, United Arab Emirates & Venezuela.

These countries have a total population of about 545 million and for nearly all of them, oil is the main marketable commodity and foreign exchange earner. Thus, for these countries, oil is the vital key to development – economic, social and political. Their oil revenues are used not only to expand their economic and industrial base, but also to provide their people with jobs, education, health care and a decent standard of living.

The organization’s principal objectives are:

1. To co-ordinate and unify the petroleum policies of the Member Countries and to determine the best means for safeguarding their individual and collective interests;

2. To seek ways and means of ensuring the stabilization of prices in international oil markets, with a view to eliminating harmful and unnecessary fluctuations; and

3. To provide an efficient economic and regular supply of petroleum to consuming nations and a fair return on capital to those investing in the petroleum industry.

The Organization of the Petroleum Exporting Companies (OPEC) was created in 1960 to unify and protect the interests of oil-producing countries. OPEC allows oil-producing countries to guarantee their income by coordinating policies and prices among them. This unified front was created primarily in response to the efforts of Western oil companies to drive oil prices down. The original members of OPEC included Iran, Iraq, Kuwait, Saudi Arabia, and Venezuela. OPEC has since expanded to include six more countries, making a total membership of 11.

OPEC represents a considerable political and economical force. Two-thirds of the oil reserves in the world belong to OPEC members; likewise, OPEC countries are responsible for half of the world's oil exports. The fact that OPEC controls the availability of a substance so universally sought after by modern society renders the organization a force to be reckoned with.

The first display of the effect OPEC power could have on the world's politics was in the 1970s. When the Yom Kippur War exploded in the Middle East, the United States assisted Israel in defending itself against the Egyptian and Syrian armies. In what may have been a response to this interference in the war, OPEC instituted an oil embargo that targeted the United States and its European allies. The embargo lasted from October 19, 1973 to March 17, 1974.

The effects of the OPEC oil embargo were widespread. Immediate effects included inflation and economic recession in the United States and other countries targeted by the embargo. Car owners in the United States were restricted to specific days on which they could purchase gasoline: even dates for cars with even-numbered license plates, and odd dates for cars with odd-numbered license plates.

A national law introducing more restrictive speed limits was instituted, as well as a year-round Daylight Savings Time. The OPEC oil embargo also drove auto manufacturers to produce smaller and more fuel-efficient vehicles. Even after the embargo ended, oil prices continued to rise, and the United States economy continued to suffer.

Although OPEC is often seen as a villain in the political arena, the organization serves an important purpose. OPEC prevents its members from being taken advantage of by industrialized countries, by ensuring that oil-exporting countries are paid a fair price for crude oil. Because oil-exporting countries are dependent on industrialized countries for oil products, OPEC standards prevent industrialized countries from buying crude oil at rock-bottom prices, then turning around and selling oil products back at vastly inflated prices.


دانلود با لینک مستقیم


تحقیق درموردمتن انگلیسی اپک جدید 1000